| Round cylindrical bottle | Pressure-sensitive wraparound labeling | Partial wrap or full wrap | Flexible label design; no steam tunnel or hot-melt adhesive required; well suited to changing label artwork. | Accurate bottle spacing and orientation help prevent skewing, wrinkles, or inconsistent overlap. | Small to high-volume lines that need straightforward product or label changeovers. |
| Round bottle for high-volume production | Roll-fed wraparound labeling with hot-melt adhesive | Full wrap | Uses labels supplied on a roll and can support high-speed continuous production; label material can be economical in large runs. | Requires adhesive application and careful setup; economical performance depends on production volume and label design. | Large, steady production runs of consistently shaped bottles. |
| Square or rectangular bottle | Front-and-back pressure-sensitive labeling | One label on each of two faces, or a combined front-and-back label | Displays information on broad, flat panels and can accommodate distinct front and back designs. | Bottle orientation and panel positioning are important; labels may wrinkle if they extend across sharp corners. | Lines packaging water in bottles with flat labeling panels. |
| Oval or flattened bottle | Front-and-back pressure-sensitive labeling with bottle alignment | One or two labels on the flatter sides | Provides readable label placement on shaped bottles without covering the entire container. | May need bottle guides or orientation control to keep labels centered on the intended panels. | Flexible runs with distinctive bottle shapes and moderate label coverage. |
| Contoured, waisted, or uniquely shaped bottle | Shrink-sleeve labeling | Partial or full-body coverage | Conforms to curved surfaces and can cover areas that are difficult to label with flat pressure-sensitive labels. | Requires sleeve application and a heat-shrink process; heat settings and bottle material compatibility must be validated. | Products needing extensive graphics or coverage across complex contours. |
| Rigid cylindrical bottle in a very large, consistent run | Cut-and-stack labeling | Partial wraparound | Can be suited to high-volume production using pre-cut labels and adhesive applied during the labeling process. | Requires label handling and adhesive control; less convenient when label designs change frequently. | Long production runs with stable bottle and label specifications. |
| Mixed shapes or frequent product changeovers | Configurable pressure-sensitive labeling system | Depends on label station and bottle format | Can accommodate multiple bottle formats when guides, tooling, and label recipes are designed for the range. | Confirm the machine’s format range, adjustment method, and changeover time with the supplier using actual bottles. | Facilities producing several water bottle sizes or shapes on shared equipment. |