| Application and temperature range | Many silicone hose compounds are designed for service around −50°C to +200°C, but the usable range depends on compound, construction, pressure, and exposure conditions. | A datasheet stating continuous and intermittent temperature limits for the proposed hose construction, plus any restrictions for oil, fuel, steam, or chemicals. | 15% |
| Pressure and reinforcement design | Pressure capability varies with inside diameter, wall thickness, reinforcement layers, temperature, and bend geometry; avoid relying on a generic pressure figure. | Working-pressure and burst-test data for the exact size and construction, along with reinforcement material and test conditions. | 15% |
| Size and construction range | Check availability of straight, reducer, elbow, formed, and multi-ply hoses; confirm dimensions, tolerances, and minimum bend radius for each design. | A current size and shape catalog, dimensioned drawings, tolerance table, and sample approval process. | 10% |
| Compound and hardness options | Silicone compounds are available in different hardnesses; Shore A values around 30–80 are common across many product applications. Hardness alone does not establish suitability. | Compound identification, stated Shore A tolerance, cure information where relevant, and application-specific compatibility data. | 10% |
| Quality management and traceability | Assess documented production controls, lot identification, nonconformance handling, and change notification. Certification scope should cover the relevant manufacturing site and process. | Current quality-system certificates, sample inspection records, lot-traceability example, and written change-control procedure. | 15% |
| Testing and validation | Testing should match the application and the agreed specification. Hose test methods and acceptance criteria depend on construction and end use. | Test reports for dimensions, pressure or burst performance, adhesion where applicable, aging, and any customer-required validation. | 15% |
| Regulatory and material compliance | Requirements depend on the market and intended use. Food-contact, medical, automotive, and general industrial applications have different documentation and validation needs. | Application-specific declarations and supporting test documents. Verify that any cited regulation or standard applies to the exact compound and finished product. | 10% |
| Customization and tooling | Custom bends, reducers, colors, markings, and end configurations may require dedicated tooling or process validation. | Tooling quotation, ownership terms, drawing approval workflow, prototype lead time, and repeat-order controls. | 5% |
| Commercial and delivery capability | Compare quoted minimum order quantities, sample and production lead times, capacity commitments, packaging, and export terms using the same requested specification. | A comparable quotation, lead-time assumptions, packaging details, Incoterms, and escalation contacts for supply interruptions. | 5% |