| Laser type | Direct-diode laser; diode-pumped solid-state (DPSS) laser | These are different architectures. A direct-diode laser emits light from a semiconductor diode; a DPSS laser uses a diode to pump a separate solid-state gain medium. | Confirm the laser architecture and whether the quoted output is the diode’s output or the final system output. |
| Wavelength | Visible examples include approximately 405 nm, 450 nm, 520 nm, and 635–660 nm. Near-infrared diode options commonly include approximately 780–980 nm. | Wavelength affects material absorption, visibility, optical-component compatibility, and eye-safety requirements. | Match the specified wavelength and tolerance to the application and verify it under the stated operating conditions. |
| Optical output power | Specified in milliwatts (mW) or watts (W); available power depends on wavelength, package, beam format, and laser architecture. | Power affects processing or illumination capability, but higher power can also increase thermal-management and safety requirements. | Compare rated optical output—not electrical input—and check whether the value is continuous-wave or pulsed peak power. |
| Operating mode | Continuous wave (CW), pulsed, or modulated output | The operating mode determines how energy is delivered and whether the laser can meet timing or peak-intensity requirements. | For pulsed systems, check pulse width, repetition rate, duty cycle, and pulse energy where applicable. For modulation, check response time and modulation bandwidth. |
| Beam quality and profile | Round or elliptical beam; collimated or focused output; beam quality may be reported using M² where applicable. | Beam shape and quality affect focus size, working distance, uniformity, and coupling efficiency. | Request beam dimensions, divergence, profile, and measurement conditions. Check whether the stated M² value applies to the delivered beam. |
| Spectral width and wavelength stability | Reported as spectral linewidth or wavelength drift; values depend on laser design, temperature, and drive conditions. | Spectral performance matters for spectroscopy, sensing, pumping, and applications that require a stable wavelength. | Check the measurement method, operating-temperature range, and whether wavelength stability is specified over time or temperature. |
| Power stability and noise | May be specified as percentage variation over a stated time or as relative intensity noise. | Fluctuating output can affect measurement repeatability, process consistency, and system calibration. | Compare stability over the same time interval and operating conditions; ask whether the figure is measured at the laser or at the work plane. |
| Electrical input and efficiency | Electrical power, drive current, forward voltage, and optical-to-electrical efficiency may be listed. | These values determine power-supply requirements, energy consumption, and heat generated within the system. | Confirm required driver specifications, startup behavior, and whether efficiency figures include the complete laser system. |
| Cooling and operating temperature | Conduction-cooled, fan-cooled, or liquid-cooled designs; allowable temperature ranges vary by model. | Temperature control influences reliability, wavelength, and output stability—especially at higher power. | Check heat load, cooling method, ambient-temperature limits, and any required temperature-control hardware. |
| Optical delivery and interface | Free-space output or fiber-coupled output; connectors, fiber core size, and numerical aperture vary. | The delivery format determines how easily the laser integrates with existing optics or equipment. | Verify connector type, fiber specifications, output aperture, mounting dimensions, and compatibility with the intended optical path. |
| Lifetime and reliability | Often expressed as an estimated operating life or maintenance interval; performance depends on use and environment. | Reliability affects downtime, replacement planning, and total cost of ownership. | Ask how lifetime is defined, which operating conditions apply, and what warranty and service support are provided. |
| Safety and compliance | Laser classification and required controls depend on accessible emission, wavelength, and product configuration. | Safe installation and operation require appropriate controls for the actual laser and application. | Review the product’s classification, safety documentation, interlock provisions, and applicable local requirements. |