| Mechanical low-pressure pump | Older gasoline engines with carburetors; some legacy fuel systems | Usually engine-driven by a cam or eccentric. A diaphragm or piston draws fuel from the tank and supplies it at low pressure. | Commonly about 0.2–0.5 bar (3–7 psi), depending on engine and pump design | Simple construction; no dedicated electric pump motor; straightforward service on compatible engines | Confirm mounting, lever or actuator geometry, flow capacity, fuel compatibility, and the pressure required by the carburetor. Not suitable as a direct replacement for modern high-pressure systems. |
| Electric low-pressure / port-injection pump | Gasoline port fuel injection (PFI), carbureted conversions, and fuel-transfer applications | An electric motor drives an impeller, roller-cell, or other pumping element. It may be mounted in the tank or externally in the fuel line. | Many gasoline PFI systems operate around 3–5 bar (44–73 psi); specifications vary by system | Can deliver fuel independently of engine speed; supports reliable starting and consistent supply; available in in-tank and inline configurations | Check required flow at operating pressure, voltage, current draw, connector and port format, filtration, noise, and whether the vehicle requires a return-style or returnless system. |
| Gasoline direct-injection (GDI) high-pressure pump | Gasoline direct-injection engines, typically paired with an in-tank low-pressure supply pump | Usually camshaft-driven. The high-pressure pump compresses fuel and feeds the direct-injection rail; the electronic control system manages pressure to meet engine demand. | Commonly about 50–350 bar (725–5,076 psi); some newer designs operate at higher pressures | Enables fuel injection directly into the combustion chamber and supports precise fuel delivery across changing engine loads | Verify engine code, pump revision, cam-follower requirements, inlet supply pressure, rail connection, sensor compatibility, and installation procedures. Do not confuse it with the low-pressure in-tank pump. |
| Diesel common-rail high-pressure pump | Common-rail diesel engines in passenger vehicles, commercial vehicles, and off-highway equipment | An engine-driven high-pressure pump supplies a shared rail. Electronically controlled injectors draw from the rail as commanded by the engine management system. | Many systems operate around 1,000–2,500 bar (14,500–36,300 psi); some newer systems reach approximately 2,700–3,000 bar | Allows flexible injection timing and multiple injection events; supports precise fuel metering and high-pressure diesel combustion | Match the pump to the engine and injection system. Check cleanliness requirements, fuel type, metering valve, rail-pressure control, calibration, and professional installation needs. |