| Mini HDD rig | Generally up to 20,000 lbf (about 89 kN) | Short utility crossings, service connections, irrigation lines, and small-diameter water, gas, or communications conduits | Soil and other formations that can be drilled with suitable bits and fluid support; capability depends on the selected tooling | Compact transport and a small working footprint can suit urban or residential work. Check access, bore length, product-pipe size, and local noise or emissions requirements. |
| Mid-size HDD rig | Typically about 20,000–100,000 lbf (about 89–445 kN) | Longer utility installations, road and rail crossings, and medium-diameter pipelines or conduit bundles | Many soil conditions; mixed ground may require changes to the drill head, reamer, or drilling-fluid plan | Compare thrust and pullback ratings with the planned bore, product pipe, reaming steps, and site conditions. Also assess transport dimensions and fluid-management needs. |
| Maxi HDD rig | Typically above 100,000 lbf (above 445 kN) | Long-distance crossings and large-diameter water, energy, and infrastructure pipelines | Project-dependent; appropriate tooling and a ground-specific drilling plan are essential, especially for long or complex bores | Requires substantial site preparation, transport planning, and drilling-fluid handling. Confirm the complete system capacity, including tooling and pipe-handling equipment. |
| Rock-capable HDD configuration | Available across different rig sizes; capacity depends on the rig and tooling package | Crossings where competent rock or hard formations are expected | Hard, abrasive, or fractured rock, subject to geological assessment | May use a suitable rock drill head or downhole motor and compatible tooling. Verify torque, circulation requirements, wear-part availability, and the planned method for changing tooling. |
| Compact / restricted-access HDD rig | Varies by model; commonly selected for lower-capacity work | Installations in confined sites, landscaped areas, or locations with limited equipment access | Depends on the rig’s drilling capacity and the selected tooling; compact size alone does not indicate ground capability | Check machine dimensions, setup clearance, anchoring method, achievable bore length, and whether the rig can handle the required product pipe. |