| 1. Compact two-wheel steel caddy | About 25 gallons | Narrow footprint and hand-truck-style movement; requires the operator to tilt and balance the load. A covered, secure storage position helps limit access and impact risks. | Small shops and occasional refueling where floor space is limited. | Confirm the tank and dispensing equipment are suitable for gasoline. Review applicable handling, storage, and ignition-control provisions; a caddy is not automatically an OSHA-approved safety can. |
| 2. Standard four-wheel steel caddy | About 30 gallons | Four wheels support a stable, low-speed push on smooth floors. Check wheel locks, handle strength, and clear access to the fill and dispensing points. | Maintenance bays and facilities with level, paved routes. | Under §1910.106(e)(2)(ii), review applicable closed-container and controlled-dispensing requirements. Do not dispense near ignition sources or where the transfer setup is unsuitable for flammable liquid. |
| 3. Low-profile four-wheel caddy | About 30 gallons | A lower tank position can make loading and movement easier, but the wider footprint may need more turning room. Use only on routes compatible with its wheels and rated load. | Frequent movement between work areas on smooth surfaces. | Keep the container closed except during necessary transfer or use, as applicable. Check the site’s designated flammable-liquid storage location and spill-control procedures. |
| 4. Mid-capacity four-wheel steel caddy | About 50 gallons | Carries more fuel per trip but increases total rolling load. A pump and hose can reduce manual lifting; secure the hose and nozzle when moving or storing the unit. | Fleet or equipment maintenance with regular, moderate fuel demand. | Verify the tank’s intended fuel, capacity, and any required listing or approval. Apply relevant §1910.106 storage and transfer rules to the actual workplace setup. |
| 5. Heavy-duty shop caddy with pump | About 55 gallons | A powered or hand-operated pump can make repeated dispensing more convenient. The pump, hose, nozzle, and any electrical components must be appropriate for the fuel and operating environment. | Work areas that refuel equipment regularly and have trained operators. | Assess transfer equipment, ignition hazards, and any bonding or grounding needs for the specific transfer method. OSHA requirements depend on the operation and installation. |
| 6. High-capacity mobile steel caddy | About 80 gallons | Reduces refill trips but needs more space and careful route planning. Consider the loaded weight, turning clearance, floor condition, and a secure, ventilated storage arrangement. | Large maintenance operations with controlled storage and movement routes. | Review applicable §1910.106 storage provisions, including §1910.106(d) where relevant to indoor storage. Confirm that the workplace’s quantity limits and fire-protection arrangements are appropriate. |
| 7. Towable high-capacity fuel caddy | About 100 gallons | Can serve remote work areas, but towing adds requirements for vehicle compatibility, secure attachment, speed, route, and tank restraint. Not intended for every indoor or public-road use. | Large outdoor worksites with an approved towing plan and designated fueling area. | Check applicable OSHA rules plus local fire, transport, and site requirements. Do not assume that a portable or towable tank is approved for every storage or transport use. |