| 1. Identify every polymer part | Connector housing, insert, contact carrier, seal, and any molded backshell | UL 94 classifications apply to tested plastic materials, not to metal locking hardware by itself. | Ask which specific parts and material grades have a documented classification. |
| 2. Match the rating to the application | Molded housing or insulating components near electrical equipment | V-0, V-1, and V-2 are vertical-burning classifications; HB is a horizontal-burning classification. They are different test classifications. | Confirm the specification calls for the classification you need; do not treat the labels as interchangeable. |
| 3. Check the tested thickness | Thin housing walls, ribs, and other molded sections | A material’s UL 94 result can depend on specimen thickness; a classification at one thickness does not automatically establish the same result at another. | Compare the listed test thickness with the connector’s relevant wall thickness and material documentation. |
| 4. Confirm the exact material grade | Resin type, grade, and formulation used for the molded parts | Different grades or formulations of the same base polymer may have different flammability results. | Request documentation that identifies the material grade used in the offered connector, rather than relying on a generic polymer name. |
| 5. Review seals and secondary plastics separately | Elastomeric seals, grommets, potting materials, and cable-entry parts | A housing’s classification does not establish the classification of a different material used elsewhere in the connector. | Check whether these parts have separate material data and whether their ratings meet the end-use requirements. |
| 6. Verify the evidence, not just the claim | Material records or applicable certification documentation | A UL 94 material classification is a flammability result under specified test conditions; it is not, by itself, a certification of the complete connector or its installation. | Request traceable records showing the material, classification, and applicable thickness, then check any separate product-level requirements. |
| 7. Consider the installed assembly | Connector, cable, nearby materials, mounting, and operating environment | UL 94 does not determine the full fire safety or electrical suitability of an assembled end product. | Assess the connector within the complete application and check relevant product standards, temperature limits, and installation requirements. |