| Weather and UV resistance | A weather-resistant ASA surface layer with documented outdoor-aging results. | Ask for color change, gloss retention, and impact-property retention after a stated exposure test. Results depend on the test method, exposure duration, color, and formulation. | ASA is used for outdoor applications because its surface is generally more weather-resistant than standard ABS, but actual performance varies by sheet construction and grade. | Exterior panels, vehicle trim, outdoor equipment housings, and building components. |
| Sheet construction | Clearly identified solid ASA or ASA-capped construction, including the cap-layer thickness where applicable. | Request total sheet thickness, ASA cap thickness, substrate material, and whether the sheet is coextruded or solid. | In capped sheets, the ASA layer provides the exposed surface while the substrate contributes much of the sheet’s structural and forming behavior. | Choose based on whether surface weatherability, through-color appearance, or a particular substrate property is the priority. |
| Impact strength | Impact results measured on a specimen and at a temperature relevant to the application. | Compare the same test method, specimen thickness, notch condition, and test temperature. Do not compare values from different methods as if equivalent. | Impact behavior can change with thickness, temperature, sheet orientation, forming, and substrate composition. | Parts exposed to knocks, handling, vibration, or cold-weather service. |
| Heat resistance | Heat-deflection or softening data appropriate to the expected service temperature. | Request heat-deflection temperature with its applied load, or Vicat softening temperature with the stated test method. These are different measurements. | Heat can cause a formed sheet to soften or lose dimensional stability; a test value is not automatically a continuous-use temperature. | Enclosures, vehicle components, and panels exposed to elevated temperatures. |
| Formability and thickness consistency | Uniform gauge, predictable heating behavior, and a forming window suited to the intended process. | Compare thickness tolerance, recommended processing conditions, and sample performance after the actual forming cycle. | Heating and stretching can thin corners and change appearance or mechanical performance, especially in complex shapes. | Thermoformed covers, housings, and shaped exterior parts. |
| Color and surface finish | Consistent color, gloss, and texture, with weathering data for the selected color and finish. | Specify color tolerance and finish; request aged samples or measured color and gloss results where appearance is critical. | Color and gloss changes under outdoor exposure can differ between formulations, pigments, and surface textures. | Visible exterior surfaces and products requiring appearance consistency across production batches. |
| Water absorption | A documented result measured by a recognized method and under stated conditions. | As a broad material reference, unfilled ASA commonly has low 24-hour water absorption, often around 0.2–0.3% by mass; sheet construction and test conditions can affect the result. | Moisture uptake may influence dimensions and properties, although it is only one factor in outdoor durability. | Outdoor parts and components used in humid environments. |
| Density and weight | A density value that supports the required part weight and material-use estimate. | Unfilled ASA is commonly around 1.05–1.10 g/cm³; confirm the actual sheet value, particularly for modified or multilayer constructions. | Density helps estimate sheet weight and material consumption, but it does not determine strength by itself. | Weight-sensitive parts, transport applications, and production-cost calculations. |
| Chemical and cleaning-agent resistance | Compatibility information for the specific liquids, cleaners, oils, or environmental contaminants involved. | Request immersion or exposure results for the exact chemical, concentration, temperature, and contact time. Test finished parts where possible. | Chemical resistance is exposure-specific; some solvents and aggressive cleaners can cause swelling, surface damage, or cracking. | Equipment covers, service panels, and parts that are regularly cleaned or exposed to chemicals. |
| Compliance and traceability | Current documentation that matches the exact grade, color, thickness, and construction being purchased. | Check applicable declarations, test reports, lot identification, and revision dates. Requirements depend on the end use and region. | Compliance and traceability help verify that production material matches project requirements and support quality control. | Regulated applications, repeat production, and projects with formal material-approval requirements. |