| 1. Rotary-bowl centrifugal gas–liquid separator | Process liquids containing entrained or free gas; used in process and fluid-handling systems. | Rotation creates a centrifugal field that separates phases according to their density difference; the separated gas is vented. | Can provide continuous separation in a compact unit when the feed contains free gas. | Primarily removes free gas, not gas already dissolved in the liquid. Performance depends on flow rate, gas fraction, and liquid properties. |
| 2. Centrifugal thin-film Vacuum Degasser | Process liquids requiring removal of dissolved gases, such as oxygen or carbon dioxide. | A rotating element spreads liquid into a thin film while reduced pressure encourages dissolved gas to leave the liquid. | Combines increased liquid surface area with vacuum-driven gas release; useful where dissolved-gas removal is required. | Requires vacuum equipment and suitable seals. Results depend on pressure, temperature, film formation, residence time, and liquid viscosity. |
| 3. Rotating packed-bed (high-gravity) degasser | Gas–liquid process streams in chemical and environmental applications where intensified mass transfer is useful. | A rotating packed bed generates a high-gravity field that increases gas–liquid contact and supports transfer of dissolved gas from liquid to a stripping gas or vacuum system. | High interfacial area and relatively compact equipment can support intensive mass-transfer operations. | Requires appropriate operating conditions and control of packing, liquid distribution, and rotation. It is a mass-transfer contactor, not simply a mechanical free-gas separator. |
| 4. Gas–liquid hydrocyclone degasser | Streams containing free gas and liquid, including selected produced-fluid and process applications. | Tangential entry creates a swirling flow. Density differences move phases into different regions of the cyclone for separate outlets. | No rotating internal parts; compact and suitable for continuous operation when feed conditions are appropriate. | Best suited to free-gas separation. Efficiency can be affected by gas loading, pressure, flow stability, and solids; it does not generally remove dissolved gas by itself. |
| 5. Drilling-fluid vacuum degasser with centrifugal feed or circulation | Drilling mud containing entrained gas after gas influx or gas-cut circulation. | Vacuum and internal agitation or spray expose the mud to reduced pressure so gas can disengage. A centrifugal pump may circulate or feed the mud, but is not necessarily the degassing mechanism. | Designed for returning drilling fluid to circulation after removal of entrained gas; vacuum operation can help release gas from the mud. | Do not assume every mud vacuum degasser is a centrifugal separator. Selection must account for mud rheology, solids, gas loading, and safe handling of the extracted gas. |
| 6. Rotary inert-gas degasser for molten aluminum | Molten aluminum alloys in foundry operations where dissolved hydrogen and some non-metallic inclusions need to be reduced. | A rotating impeller disperses an inert treatment gas, commonly argon or nitrogen, into fine bubbles. Hydrogen diffuses into the bubbles, which rise and escape. | Provides a controlled melt-treatment method; rotor speed, gas flow, and treatment time can be adjusted to the process. | This is gas purging and melt treatment rather than vacuum degassing. Results depend on alloy, melt cleanliness, temperature, rotor condition, and operating practice. |
| 7. Centrifugal thin-film devolatilizer | Polymer melts, resins, and other viscous process materials requiring removal of residual monomers, solvents, or other volatile compounds. | A rotating surface or element forms a thin, renewed film; heat and vacuum promote the transfer of volatile components into the vapor phase. | Thin-film formation can improve contact with the vapor space and is applicable to materials that are difficult to process in ordinary vessels. | Often described as devolatilization rather than liquid degassing. Suitability depends on viscosity, thermal sensitivity, vapor load, and the material’s tendency to foul or degrade. |