| Vinyl-Insulated Ring Terminal | Copper barrel with a vinyl insulating sleeve | 22–10 AWG in common ranges | #6, #8, #10, and 1/4 in | General-purpose wiring in control panels, appliances, and light-duty equipment | Match the terminal’s wire range and stud opening to the conductor and fastener. |
| Nylon-Insulated Ring Terminal | Copper barrel with a nylon insulating sleeve | 22–10 AWG in common ranges | #6, #8, #10, and 1/4 in | Electrical assemblies where a durable insulated crimp termination is needed | Use a crimping tool specified for the terminal type and wire size. |
| Adhesive-Lined Heat-Shrink Ring Terminal | Crimp barrel covered by heat-shrink tubing with internal adhesive | Commonly available from 22 AWG through larger cable sizes; check the specific part | Commonly #6 through 3/8 in, depending on the part | Vehicle, outdoor, or other installations that benefit from added insulation and moisture protection | Heat-shrink protection depends on correct installation and the terminal’s environmental rating. |
| Non-Insulated Ring Terminal | Bare copper crimp barrel without an insulating sleeve | 22–10 AWG in common ranges | #6, #8, #10, and 1/4 in | Compact wiring, enclosed equipment, and connections that will receive separate insulation | Provide suitable insulation and clearance after crimping to prevent accidental contact. |
| Tinned-Copper Marine Ring Terminal | Copper conductor barrel with a tin-plated surface; insulated and non-insulated versions are available | Available across small-wire and battery-cable ranges; confirm the individual terminal’s range | Commonly #8 through 1/2 in, depending on the terminal | Marine and other damp or corrosive environments when used as part of a properly specified connection | Choose a terminal and insulation system rated for the actual environment; tin plating alone does not make a connection waterproof. |
| Heavy-Duty Copper Compression Lug | Thick-walled copper barrel compressed onto a conductor with a suitable crimping tool | Commonly 8 AWG through 4/0 AWG, depending on the lug | Commonly 1/4 through 1/2 in | High-current power connections, distribution equipment, and larger conductors | Use a lug, conductor, die, and tool combination specified to work together. |
| Battery Cable Ring Lug | Large tubular copper or tinned-copper barrel for crimping onto battery cable | Commonly 6 AWG through 4/0 AWG, depending on the lug | Commonly 5/16, 3/8, and 1/2 in | Battery, starter, inverter, and other heavy-cable connections | Check cable size, stud diameter, current requirements, and the required crimping method. |
| Right-Angle (Flag) Ring Terminal | Ring barrel or tongue formed at an angle to provide a low-profile wire exit | Often available for small conductors; exact ranges vary by design | Commonly #6 through 1/4 in | Closely spaced studs or installations where a straight terminal would interfere with nearby parts | Check the bend direction and available clearance before installation. |
| Solder-Style Ring Terminal | Ring with a barrel designed to accept a soldered conductor | Varies by terminal design; select for the conductor size | Commonly #6 through 1/4 in | Applications whose assembly instructions specify a soldered wire termination | Follow the manufacturer’s soldering instructions and avoid overheating the terminal or wire insulation. |
| Two-Hole Ring Lug | Flat tongue with two mounting holes and a crimp or compression barrel | Commonly used with medium to large conductors; exact ranges vary | Hole spacing and diameters vary by lug design | Power or grounding connections where two fasteners help prevent rotation | Match both hole diameters and the center-to-center spacing to the mounting surface. |