| Product standard and scope | Confirm that the proposed MCCB is designed and tested to the applicable product standard, commonly IEC 60947-2 for low-voltage circuit-breakers. Check that the standard and edition stated in the documents match the product and intended application. | Product datasheet, declaration of conformity, test documentation, and the exact model or product-family designation. | Check that the documents cover the offered product configuration, including pole count, rated current, trip unit, and accessories. A general statement of compliance is not a substitute for product-specific evidence. |
| Breaking-capacity ratings | Compare the rated ultimate short-circuit breaking capacity (Icu) and rated service short-circuit breaking capacity (Ics) at the required operational voltage. These ratings are not interchangeable. | Technical datasheet and supporting test reports showing ratings at the relevant voltage and configuration. | Confirm that the ratings meet the project’s calculated fault level and design requirements. Do not compare breaking-capacity figures without checking their associated voltage and test conditions. |
| Rated current and trip characteristics | Verify the rated current, adjustable settings if offered, and the applicable overload and short-circuit trip characteristics. | Trip-unit specification, time-current curves, adjustment ranges, and coordination data where available. | Check compatibility with the load, conductors, upstream and downstream protection, and the project’s coordination requirements. Confirm whether settings are fixed or adjustable. |
| Temperature and installation conditions | Review the reference conditions for the stated current rating and any derating requirements for ambient temperature, enclosure, altitude, or installation arrangement. | Installation instructions, derating tables, and operating-condition limits. | Use the manufacturer’s published limits for the actual site conditions. Do not assume that the nameplate current applies unchanged in every enclosure or ambient temperature. |
| Certification and report verification | Check whether certificates or marks are relevant to the destination market, valid for the product, and issued for the appropriate scope. | Certificate number, issuing body, model list, validity information, and full test-report references where applicable. | Verify documents directly with the issuing body or its official database when available. Confirm that model numbers and ratings match the quotation; a quality-management certificate alone does not certify an MCCB product. |
| Factory identity and production capability | Establish whether the supplier manufactures the MCCB, assembles it, or resells products made by another facility. Check the production site and processes relevant to the offered model. | Business registration details, factory address, manufacturing-process overview, equipment list, and an in-person or independent factory-audit report. | Match the legal entity, factory location, quotation, and product documents. Treat trading status as a sourcing consideration rather than proof of poor product quality. |
| Quality control and traceability | Review incoming-material controls, in-process inspection, final testing, nonconformance handling, and product or batch traceability. | Quality procedures, sample inspection records, routine-test records, calibration records, and an example of a traceable production label. | Check that records identify the relevant product and batch. Ask how defective units are isolated and how corrective actions are documented. |
| Samples and independent inspection | Assess whether pre-production samples and shipment inspections can be arranged, especially for new suppliers or customized specifications. | Approved sample, inspection plan, agreed acceptance criteria, and third-party inspection records if commissioned. | Compare the sample and delivered goods against the approved datasheet, drawings, markings, and order specification. Define inspection scope and responsibility before placing the order. |
| Customization and engineering support | Confirm the supplier’s ability to support required poles, accessories, terminals, auxiliary contacts, shunt trips, undervoltage releases, or other specified options. | Configuration tables, wiring diagrams, dimensional drawings, compatibility information, and written confirmation of the order configuration. | Ensure each accessory is compatible with the exact MCCB frame and trip unit. Record the complete configuration in the purchase specification. |
| Warranty, service, and spare parts | Review warranty terms, claim procedures, technical support availability, and the availability of compatible replacement accessories or parts. | Written warranty policy, service contact details, response process, and spare-parts availability statement. | Compare the written terms, exclusions, and support arrangements with the project’s service needs. Do not rely solely on verbal assurances. |
| Commercial and delivery risk | Check quotation completeness, lead time, payment terms, packaging, shipping responsibilities, and change-control arrangements. | Itemized quotation, order confirmation, agreed delivery schedule, packaging details, and written terms for specification changes. | Make sure the order states the exact model, ratings, accessories, applicable documents, inspection requirements, and remedies for nonconforming goods. |