| 1 | BLDC motor with planetary gearbox | 12, 24 or 48 V DC | Approximately 1–100 N·m, depending on motor and gear ratio | About 10–1,000 rpm at the gearbox output | Hall sensors; optional encoder | Automation equipment, powered mechanisms and compact mobile platforms | Gearbox integration, ratio selection, shaft and mounting customization |
| 2 | BLDC motor with spur gearbox | 12, 24 or 48 V DC | Approximately 0.5–50 N·m | About 10–1,000 rpm at the gearbox output | Hall sensors; optional encoder | Small conveyors, access systems and consumer or commercial machinery | Compact gearmotor assembly and application-specific output interfaces |
| 3 | BLDC motor with worm gearbox | 12, 24 or 48 V DC | Approximately 2–100 N·m | About 5–300 rpm at the gearbox output | Hall sensors; optional encoder | Actuators, positioning systems and low-speed mechanisms | Worm-wheel matching, reduction selection and assembly testing |
| 4 | Direct-drive BLDC motor | 24, 48 or higher-voltage DC bus | Typically below 1–50 N·m, depending on frame size and design | From near-zero speed to several thousand rpm, depending on control | Hall sensors, incremental encoder or resolver | Rotary tables, fans, pumps and applications where low backlash is important | Electromagnetic design, rotor balancing and precision assembly |
| 5 | BLDC motor with planetary gearbox and encoder | 12, 24 or 48 V DC | Approximately 1–100 N·m, depending on the selected gearhead | About 10–1,000 rpm at the gearbox output | Incremental encoder; Hall sensors for commutation | Closed-loop positioning, robotics and automated material handling | Motor, gearhead and feedback-device integration with calibration options |
| 6 | BLDC servo motor with planetary gearbox | 24, 48 or higher-voltage DC bus | Approximately 0.5–100+ N·m at the gearbox output, depending on sizing | Application-dependent; selected for controlled speed and position | Encoder or resolver; compatible servo drive required | Industrial automation, robotics and precision motion systems | Servo winding, feedback alignment and motor-drive matching |
| 7 | BLDC gearmotor for electric actuators | 12, 24 or 48 V DC | Approximately 1–100 N·m at the rotary output | Typically low to moderate output speed | Hall sensors, limit switches or encoder | Linear actuators, adjustable platforms and automated equipment | Customized mounting, output coupling and end-of-line functional testing |
| 8 | Sealed BLDC gearmotor | 12, 24 or 48 V DC | Approximately 0.5–50 N·m, depending on enclosure and gearing | Application-dependent; often reduced through gearing | Hall sensors; optional encoder | Outdoor equipment, washdown-prone machinery and enclosed mechanisms | Sealing design, connector selection and environmental validation |
| 9 | BLDC motor with integrated controller and gearbox | Commonly 12, 24 or 48 V DC | Approximately 0.5–50 N·m, depending on gear ratio and thermal limits | Programmable within the motor and gearbox operating limits | Hall sensors; optional encoder | Compact machines, smart equipment and distributed motion systems | Electronics integration, parameter configuration and communications options |
| 10 | Custom high-torque BLDC motor assembly | Specified for the application; often 24 or 48 V DC in low-voltage systems | Application-specific; torque depends on motor geometry, cooling and duty cycle | Set by the required load, gear ratio and control method | Hall sensors, encoder or resolver as specified | Special-purpose machinery, robotics and OEM equipment | Custom winding, shaft, mounting, connector and performance-test specifications |