| Tube dimensions | Outside width and height, wall thickness, internal dimensions, and dimensional tolerances. | Specify dimensions in millimetres and confirm the manufacturer’s standard sizes. Available sizes and tolerances vary by production process and supplier. | Frames, equipment supports, handrails, walkways, and lightweight structures. |
| Load and span | Applied load, unsupported span, support locations, load direction, deflection limit, and connection details. | Base sizing on a structural calculation for the actual load case. FRP is anisotropic, so stiffness and strength depend on fiber direction and profile construction. | Platforms, ladders, structural frames, cable supports, and access systems. |
| Material and resin | Glass-fiber reinforcement, resin system, fiber orientation, and any required fire or chemical performance. | Polyester, vinyl ester, and other resin systems differ in chemical and environmental resistance. Verify compatibility against the specific exposure and resin data. | Chemical plant structures, water-treatment facilities, and outdoor infrastructure. |
| Mechanical properties | Longitudinal and transverse strength, elastic modulus, shear properties, and allowable design values. | Use tested product data and appropriate design factors; do not treat a generic strength value as a design allowable. Properties vary with laminate, resin, and test method. | Load-bearing members and components subject to bending, compression, or connection loads. |
| Weight and handling | Mass per unit length, installation equipment, transport limits, and manual-handling requirements. | Typical pultruded glass-fiber profiles have a density of roughly 1.7–2.0 g/cm³, though the actual value depends on the profile and resin. | Retrofits, remote installations, modular structures, and projects where reduced handling weight matters. |
| Corrosion and chemical exposure | Contact with acids, alkalis, salts, solvents, cleaning agents, moisture, and temperature extremes. | Confirm resin-specific chemical-resistance data for the concentration, temperature, and exposure duration. “Corrosion resistant” does not mean resistant to every chemical. | Wastewater treatment, marine facilities, chemical processing, and corrosive industrial environments. |
| UV and weather exposure | Sunlight, rain, freeze-thaw cycles, temperature range, and surface-finish requirements. | For outdoor use, check whether a UV-resistant surface veil, coating, or other protection is specified, and follow maintenance guidance. | Fences, outdoor platforms, utility supports, and exposed structural frames. |
| Fire and electrical requirements | Project fire codes, smoke requirements, electrical insulation needs, and grounding design. | Request test reports for the exact profile and resin system. Electrical properties and fire performance are product-specific; FRP is not automatically fireproof. | Electrical enclosures, utility structures, industrial access systems, and facilities with fire-performance requirements. |
| Connections and fabrication | Bolts, inserts, bonding, cut ends, hole locations, edge distances, and local bearing loads. | Use connection details designed for FRP. Drilling and cutting can expose fibers, so protect cut surfaces where required and follow the product instructions. | Bolted frames, modular assemblies, equipment mounts, and replacement components. |
| Compliance and documentation | Applicable project standards, quality records, test methods, traceability, and installation instructions. | Check the project specification and jurisdictional requirements, then obtain current technical data and relevant test documentation for the selected profile. | Public infrastructure, industrial projects, commercial buildings, and safety-critical installations. |