| Open-Die Forging Press | Approximately 5–100 MN (500–10,000 metric tonnes-force); larger installations are available. | Adjustable ram speed and pressure; works with flat or shaped dies and repeated strokes to reduce and shape large billets. | Shafts, bars, discs, rings, and large steel or alloy components. | Check billet size, required reduction per pass, daylight, stroke, table dimensions, and handling equipment capacity. |
| Closed-Die (Impression-Die) Forging Press | Approximately 5–200 MN (500–20,000 metric tonnes-force), depending on part size and material. | Applies controlled force through matched dies; hydraulic operation allows adjustable speed and dwell during forming. | Automotive, machinery, and industrial parts such as connecting rods, gears, and flanges. | Estimate force from projected part area, material, temperature, and die design; also consider die space and production rate. |
| Precision or Flashless Forging Press | Approximately 1–50 MN (100–5,000 metric tonnes-force). | Controlled positioning and repeatable forming can support near-net-shape parts; requires accurate billets and tooling. | Small to medium components where material savings and dimensional consistency are priorities. | Assess press stiffness, guidance, control accuracy, tooling tolerances, and the process capability required for the part. |
| Isothermal Forging Press | Approximately 1–50 MN (100–5,000 metric tonnes-force); configuration is highly process-dependent. | Designed for slow, controlled forming with heated dies maintained near the workpiece temperature. | Heat-sensitive alloys and complex aerospace or high-performance components requiring controlled deformation. | Confirm temperature uniformity, heating system capacity, cycle time, atmosphere requirements, and specialized control needs. |
| Extrusion Press for Hot Forging or Forming | Approximately 5–100 MN (500–10,000 metric tonnes-force), depending on billet and product dimensions. | Uses a ram to push heated material through a die or into a forming tool; force and speed must suit the material and process. | Long, uniform sections and formed products made from suitable metals and alloys. | Specify billet diameter and length, extrusion ratio or forming load, container dimensions, tooling, and operating temperature. |
| General-Purpose Hydraulic Forging Press | Approximately 2–100 MN (200–10,000 metric tonnes-force). | Programmable pressure, stroke, speed, and dwell can accommodate a range of tooling and forging operations. | Job shops and production lines handling varied parts, materials, or batch sizes. | Compare the usable force across the working stroke, speed range, control modes, changeover needs, and future capacity requirements. |
| Important: Tonnage ranges are indicative industry-level examples, not a specification for a particular machine. Actual press capacity and performance vary with press design, material, temperature, die geometry, stroke position, and duty cycle. Confirm required force using the part and process data before selecting a machine. |
| Before ordering: Define the workpiece material and dimensions, target output, required stroke and daylight, die area, operating speed, control and safety requirements, installation space, and available electrical and hydraulic utilities. Request a process-based capacity calculation and a machine layout for the intended application. |