| Corrosion-resistance grade | Ask for the EN 1670 corrosion-resistance grade and supporting test documentation. | Grade 5 is the highest EN 1670 classification and covers 480 hours of neutral salt-spray testing. It is a useful specification for exposed or coastal locations. |
| EN 1670 test-hour scale | Compare the declared grade with the standard’s salt-spray exposure categories. | Grade 0: no defined resistance; Grade 1: 24 hours; Grade 2: 48 hours; Grade 3: 96 hours; Grade 4: 240 hours; Grade 5: 480 hours. |
| Meaning of the salt-spray result | Confirm the test method, reported results, and the scope of the supplier’s claim. | Salt-spray hours describe a controlled laboratory test, not a direct prediction of years in service. Actual durability also depends on installation, maintenance, local exposure, and the hinge’s materials and finish. |
| Door weight and hinge capacity | Check the maximum door weight and configuration stated for the specific hinge model and number of hinges. | Do not assume that all hinges with the same appearance have the same load capacity. Follow the door-system and hinge maker’s instructions, including any limits for door width or height. |
| Compatibility with the door profile | Verify the hinge type, fixing positions, stack height, sash profile, and frame profile. | UPVC door profiles vary. Confirm the hinge is designed for the particular profile system and that the fixings engage the intended reinforcement or fixing points. |
| Adjustment range | Check whether the hinge allows adjustment in height, compression, and lateral position. | Adjustment features can help correct alignment and maintain an even seal. Confirm the available directions and range in the product instructions rather than relying on appearance alone. |
| Security and fixing | Inspect the fixing method and any anti-lift or tamper-resistant features required for the door design. | Security depends on the complete door assembly, including the frame, locking points, hinges, and fixings. Choose features appropriate to the door’s intended use and applicable local requirements. |
| Materials and finish | Request clear information about exposed components, coatings, and any corrosion-resistant components. | Material and finish details can help assess suitability, but they do not replace a relevant test classification. Pay particular attention to exposed metal parts and the condition of the coating. |
| Maintenance | Check the manufacturer’s instructions for cleaning, inspection, and lubrication. | Keep hinges clean, inspect them periodically for wear or coating damage, and use only lubricants recommended for the product. In exposed locations, regular inspection is especially important. |
| Documentation before purchase | Request the product specification, installation instructions, load guidance, and corrosion-test evidence. | Match the documents to the exact hinge model and intended door configuration. A general statement about corrosion resistance may not confirm the performance of every component or finish. |