| Digital I/O | Number of inputs and outputs, signal voltage, isolation, and whether outputs are sinking or sourcing. | Industrial signals commonly use 24 V DC; logic-level GPIO may use lower voltages and is not automatically 24 V tolerant. | Match each channel to the field device and wiring scheme. Confirm isolation and current ratings before connecting loads. |
| Analog I/O | Required input or output ranges, channel count, resolution, and sampling rate. | Common instrumentation ranges include 0–10 V and 4–20 mA; supported ranges vary by module. | Check sensor and actuator ranges, current-loop wiring, accuracy requirements, and whether signal conditioning is needed. |
| Serial Interfaces | Interface type, port count, connector, baud rate, and whether ports can be configured for the required mode. | RS-232 is generally used for point-to-point links; RS-485 supports differential multi-drop networks when the system is designed for it. | Confirm device pinout, electrical standard, termination and biasing needs, and software support. A connector alone does not identify the interface. |
| Ethernet | Port count, link speed, connector, network isolation, and any protocol or redundancy requirements. | Industrial computers may offer 10/100 or 10/100/1000 Mbps Ethernet; the negotiated link depends on the connected equipment and network. | Check cable and switch compatibility, available IP addresses, network separation, and whether the required industrial protocol is supported by the hardware and software. |
| USB and Display | Connector type, USB generation, available power, display outputs, resolution, and simultaneous-display support. | USB-C connector shape does not by itself guarantee data rate, video output, or power delivery; capabilities depend on the port implementation. | Match the required cable, display input, resolution, refresh rate, and device power draw. Verify which functions are available on each port. |
| Expansion Slots | Slot type, size, keying, interface, lane count, and available space for the expansion card. | M.2 modules use different key configurations and interfaces; PCIe cards also require a compatible slot and sufficient lanes. | Check the exact module specification, supported bus, mounting dimensions, antenna connections, and any shared-slot restrictions. |
| Storage and Memory Expansion | Drive interface, form factor, capacity support, memory type, and whether components are replaceable. | M.2 storage can use SATA or NVMe over PCIe; an M.2 connector does not guarantee support for both. Memory type and maximum capacity are platform-specific. | Confirm the system supports the intended drive protocol, module dimensions, memory specification, and required operating-system drivers. |
| Power, Mounting, and Environment | Input voltage range, connector polarity, mounting method, operating temperature, vibration, and enclosure protection. | DIN-rail and panel mounting are common industrial installation options; voltage range and environmental ratings differ by system. | Verify the power supply against the documented input range and startup demand. Check installation space, airflow, temperature limits, and environmental conditions. |