PVC layflat hose ratings often span 2–10 bar, but that range is only a starting point. Choose a hose rated above the pump’s highest expected operating pressure, not just its usual gauge reading. A pump starting against a closed valve can create a sudden pressure rise.
Pressure changes everything.
Check that the rating applies to your water temperature and hose diameter. Heat may reduce pressure capacity, while fittings, elevation, and line length affect the pressure the system needs.
Compare the pump curve with the hose’s working-pressure rating, and do not treat burst pressure as a safe operating limit. Leave a sensible margin for pressure fluctuations and check the ratings of couplings and clamps too; the weakest connection can leak first.
It is easy to select a hose from one pressure reading and miss the pump’s start-up conditions. Recheck the setup under realistic flow.
Small detail. Big consequence.
After installation, look for bulges, seepage, or movement at the connectors during a controlled test. A little extra care here can prevent an inconvenient failure in the field.