| Section shape and depth | The cross-section’s shape, dimensions, bends, and orientation. | Section geometry affects stiffness and resistance to bending and buckling. Capacity cannot be determined from outside dimensions alone. | A suitable section helps resist lateral movement and deformation under load. | Compare complete engineered specifications rather than choosing by profile appearance or depth alone. |
| Steel grade and material thickness | Specified steel properties and the thickness of the formed steel, including any relevant tolerances. | Material strength and thickness contribute to the upright’s resistance to yielding and local buckling. | Consistent material and section properties help the frame perform as designed. | Use documented material specifications and the rack supplier’s rated capacities; do not infer capacity from thickness alone. |
| Perforations and beam connections | Hole pattern, hole spacing, connection fit, and the condition of locking devices. | Perforations and connection details influence the capacity of the upright and the beam-to-upright joint. | Secure, compatible connections help prevent unintended beam disengagement and reduce connection movement. | Use beams and connectors approved for the upright system, and keep safety locks in place where specified. |
| Frame bracing | Diagonal and horizontal braces, their positions, and their connections between uprights. | Bracing forms part of the frame’s structural system and can affect its calculated load capacity. | Bracing restrains frame movement and helps maintain alignment under operating loads. | Do not remove, alter, or substitute braces without approval from a qualified rack designer or the system supplier. |
| Frame height and bay configuration | Overall frame height, upright spacing, beam levels, and the installed layout. | Capacity depends on the complete frame configuration, not simply on the capacity of one upright in isolation. | Taller frames and different layouts can change frame behavior and sensitivity to sway. | Confirm that the capacity rating applies to the actual height, beam arrangement, and configuration in use. |
| Base plate, floor, and anchorage | Base-plate condition, anchor type and installation, floor condition, and required clearances. | The load path continues through the base plate and anchors into the floor; inadequate support can limit the system. | Properly specified and installed anchorage helps resist frame movement and overturning forces. | Follow the engineered installation details and verify that the floor and anchors are suitable for the rack system. |
| Damage, corrosion, and modifications | Bends, impact damage, cracked welds, corrosion, and unapproved drilling or repairs. | Damage or alterations can reduce the capacity of an upright and may invalidate its original rating. | Deformed or weakened members can compromise frame alignment and stability. | Inspect racks regularly and have damaged components assessed and replaced in accordance with applicable guidance. |