| Rotary swaging | Radially moving dies repeatedly strike the tube, reducing its diameter around a mandrel or over an internal support. | Reduced ends, tapers, stepped ends, and pointed or shaped ends. | Die profile and material determine the finished shape; mandrels help control the inside diameter and support the workpiece. | Rotary swaging head with interchangeable dies; may be manual, semi-automatic, or integrated into a production line. | Repeatable diameter reduction, tube preparation for insertion, and high-volume production of formed ends. | Check for wall-thickness changes, surface marking, and the need for internal support. Suitability depends on material ductility and tube dimensions. |
| Axial end forming | A punch or forming tool applies force along the tube axis, upsetting or displacing material into a die cavity. | Beads, flanges, collars, expanded ends, and other features formed by axial displacement. | Matched dies, punches, and—in some applications—an internal mandrel support the tube and define the final profile. | Hydraulic or servo-electric press with a dedicated end-forming station; multi-station versions can perform successive operations. | Defined end features where controlled axial material flow and a consistent seating surface are important. | Excessive forming can cause wrinkles or buckling. Confirm available material length, wall thickness, and the required support method. |
| Rotary forming or spinning | One or more rollers progressively move material against a rotating tube or tool, forming the end over multiple passes. | Flares, beads, rolled edges, and contoured profiles. | Roller geometry and forming sequence affect the profile; changeover may require application-specific rollers and setup. | Rotary end-forming machine with a rotating spindle, forming rollers, and a tube clamping system. | Gradual forming of axisymmetric ends and applications where a smooth, rolled profile is required. | Cycle time and achievable geometry depend on the number of passes, material behavior, and workpiece support. Validate runout and concentricity. |
| Roll forming | Rolls progressively shape the tube end as the workpiece is fed or rotated through the tooling. | Beads, grooves, hems, and other rolled end details. | Roll profiles and roll spacing must match the required geometry; tooling wear can affect profile consistency. | Dedicated roll-forming station or in-line machine with adjustable or interchangeable rolls. | Repeated production of consistent rolled features, particularly when the geometry can be produced in a continuous or progressive operation. | Not every end shape is accessible to rollers. Check tool access, tube clamping, edge condition, and the effect of forming on the tube wall. |
| Hydroforming | Pressurized fluid expands the tube into a closed die; axial feeding may be used to manage material flow and fill the cavity. | Expanded ends, bulges, transitions, and selected complex shapes defined by the die. | Requires a sealed die and pressure system; sealing surfaces and die design are central to repeatability. | Hydroforming press with a pressure intensifier, sealed tooling, and controls for pressure and, where applicable, axial feed. | Complex shapes that are difficult to produce with a simple punch or roller operation. | Higher system and tooling complexity; assess sealing, pressure requirements, cycle time, and material formability before selection. |
| Press forming with segmented or split dies | A press drives the tube into or against a die set; split or segmented tooling can open for loading and release formed profiles. | Expanded or reduced ends, shoulders, and profiles that can be produced with a closed or segmented die. | Die segments, punch geometry, and any internal support must be matched to the tube and the release path of the finished part. | Mechanical, hydraulic, or servo-electric press with a purpose-built tool set; often suitable for automated loading. | High-volume work with a stable part design and a clearly defined forming sequence. | Tool access and part removal can constrain geometry. Check for wrinkling, cracking, and dimensional variation during trials. |
| Tooling and support strategy | Tooling may use external dies alone, an internal mandrel, a punch, rollers, or a sealed die, depending on the forming method. | Controls the profile, inside diameter, wall support, and repeatability of the formed feature. | Compare changeover time, tool life, inspection needs, and whether one tool set can cover the required part family. | Quick-change tooling is useful for frequent product changes; dedicated tooling can suit stable, repetitive production. | Operations with known tube dimensions, material grades, and end-profile tolerances. | Confirm tooling compatibility with the actual tube material, outside diameter, wall thickness, and required tolerances. |
| Machine configuration and controls | Machines range from single-operation units to multi-station or automated cells with feeding, clamping, and part handling. | Configuration affects throughput, setup effort, process monitoring, and integration with upstream or downstream operations. | Consider the number of tools and stations, changeover access, guarding, and availability of process monitoring. | Manual or semi-automatic machines for flexible, lower-volume work; automated or multi-station systems for repeatable production runs. | Selection should reflect production volume, product mix, operator involvement, and available floor space. | Compare total cycle time and changeover time—not just forming speed. Confirm that the controls and safety features suit the intended operation. |