| Surface uniformity | Consistent mirror appearance across the sheet, without obvious cloudy patches, streaks, or uneven polishing. | View the clean surface under diffuse lighting and inspect from several angles. | Specify uniform appearance across the usable area; define viewing conditions and allowable visual variation in the order. | Uneven polishing can be conspicuous on decorative or reflective applications. |
| Scratches and handling marks | Scratches, scuffs, dents, fingerprints, and other marks on the finished face. | Inspect the full surface before removing any protective film; use agreed lighting and viewing distance. | State whether visible scratches are acceptable and define defect limits, inspection conditions, and the inspected area. | A highly reflective finish makes small surface defects easier to notice. |
| Reflection and image clarity | The sharpness and consistency of reflected lines or objects; confirm the requested 8K appearance with a physical sample. | Compare samples side by side under the same lighting, or use an agreed gloss or image-quality measurement method. | Approve a reference sample and specify any measurement method and acceptance range; do not rely on the “8K” label alone. | “8K” is commonly used as a commercial mirror-finish designation, but it does not by itself define one universal inspection threshold. |
| Polishing lines and direction | Fine polishing marks, their direction, and whether they are consistent across the sheet. | Examine the surface under raking light and compare it with the approved sample. | Specify the required finish appearance and any preferred polishing direction when relevant to the design. | Directional variation can affect the appearance of adjacent panels after installation. |
| Protective film | Film coverage, adhesion, bubbles, trapped particles, edge coverage, and suitability for the intended processing and storage period. | Check film condition on arrival and test removal on a sample if adhesive compatibility is important. | Agree which face is protected, film type, removal expectations, and any exposure or storage limits with the supplier. | Suitable film can reduce abrasion and contamination during handling, transport, and fabrication. |
| Plate dimensions and flatness | Thickness, length, width, squareness, and flatness against the purchase specification. | Measure with suitable calibrated instruments and compare results with the agreed drawing or tolerance standard. | List nominal dimensions and applicable tolerances on the order; confirm measurement locations and reporting requirements. | Dimensional conformity supports fit-up and reduces rework during fabrication. |
| Packaging and edge protection | Non-abrasive interleaving, protected corners and edges, secure bundling, and packaging suitable for the transport route. | Review packaging requirements before dispatch and inspect the outer packing and plate edges on receipt. | Request dry, clean packaging with surface separation and edge protection; specify export or moisture-barrier packing when needed. | The polished face and plate edges can be damaged by movement, impact, moisture, or contact with abrasive materials. |
| Material identification and traceability | Grade, heat or batch identification, dimensions, finish, and accompanying inspection documents. | Match bundle labels and documentation to the purchase order; verify required material certificates are included. | State the required stainless steel grade, certificate type, marking method, and traceability documents in the order. | Clear identification helps confirm the delivered material matches the specified application requirements. |