Start with the process temperature, not the chiller’s lowest advertised setting. A sample line may need stable cooling at -40°C, while a test chamber may require much colder conditions. Leave room for heat entering through insulation, fixtures, and frequent door openings. A setpoint alone can mislead.
Check the coolant against the full operating range. The NIST Chemistry WebBook (Standard Reference Database 69) gives normal boiling points of 77.36 K for nitrogen and 87.30 K for argon. These values show how different cryogenic fluids operate; they are not recommended chiller setpoints. Actual conditions depend on pressure and system design.
Small mismatch, big trouble.
Confirm the chiller’s stated supply and return temperatures, then compare them with the process load and required stability. Ask for performance data at your operating conditions, not just a headline capacity.
Compatibility is equally practical.
Match hose and fitting sizes, coolant type, flow rate, pressure limits, electrical supply, and control signals to the connected equipment. Check whether the fluid can contact every wetted material, especially seals and tubing. A technically capable unit may still perform poorly with restrictive pipework or insufficient flow.
I would double-check the assumptions here; they are easy to overlook.
Record the actual operating temperature and flow during commissioning, then revisit the selection if the process changes.