When planning shelf racking, set aisle widths from the lift truck you will actually use, not a generic warehouse diagram. Check its right-angle stacking dimensions, turning radius, and load capacity in the manufacturer’s specifications. Then account for pallet size, load overhang, and how the truck approaches each rack face. A wide pallet can change the clearance you need. So can a long load.
OSHA 1910.176(b) requires sufficient safe clearance in aisles and at turns, doorways, and loading docks; it does not prescribe one universal aisle width. Permanent aisles must also be appropriately marked and kept clear.
Measure the route with the truck carrying a typical load, including tight turns near end frames and cross aisles. Leave room for small tracking errors, but avoid guessing at a safety margin without testing the layout. A drawing can look tidy and still be wrong. If possible, mark the proposed aisle edges on the floor and conduct a controlled trial with trained operators. Watch for pallet corners nearing uprights, pedestrians entering the travel path, and loads that block sightlines. Record the truck model, load dimensions, and test conditions so future changes can be checked. Honestly, this step may expose a layout flaw late. Better to find it before racks are anchored and inventory fills the bays.