| Flange type | Weld neck, slip-on, blind, socket weld, threaded, or lap joint | The type affects connection method, dimensions, fabrication, and suitability for the piping layout. | Weld neck flange |
| Nominal pipe size | Specify NPS or DN, and state the applicable dimensional standard. | Nominal size identifies the pipe connection. It is not necessarily the flange’s measured outside diameter. | NPS 4 (DN 100) |
| Pressure class | For example, ASME Class 150, 300, 600, 900, 1500, or 2500, where applicable. | Class is part of the flange rating designation; allowable pressure depends on material and temperature, not class alone. | ASME Class 150 |
| Dimensional standard | Identify the standard and required edition. Common examples include ASME B16.5 for NPS 1/2 through 24 and ASME B16.47 for NPS 26 through 60. | Standards define dimensions, tolerances, pressure-temperature ratings, and other requirements. Confirm the applicable standard for the project. | ASME B16.5, project-required edition |
| Material grade | Specify the required material specification and grade, such as ASTM A105 for carbon steel forgings or ASTM A350 LF2 where low-temperature service requirements apply. | Material selection must match the design conditions, service environment, and applicable code or project specification. | ASTM A105, subject to project specification |
| Facing and finish | State the facing type, such as raised face (RF), flat face (FF), or ring-type joint (RTJ), and any specified finish requirements. | The mating flange and gasket must be compatible with the selected facing and finish. | Raised face; finish to the project specification |
| Bore and pipe schedule | Provide the pipe outside diameter, wall thickness or schedule, and required flange bore. | These details help ensure the flange bore matches the connecting pipe and required fit-up. | NPS 4 pipe; provide schedule or measured wall thickness |
| Application and service conditions | Describe the service, design pressure and temperature, fluid, corrosion or erosion concerns, and any low-temperature requirements. | Application details help the supplier assess material and specification requirements. Final suitability should be confirmed by the project engineer. | Process water line; provide design pressure and temperature |
| Quantity and delivery | State the quantity, requested delivery location, required delivery date, and whether partial shipments are acceptable. | Quantity and logistics affect availability, lead time, packaging, and freight planning. | 12 pieces; delivery location and required date to be confirmed |
| Inspection and documentation | List required inspection, testing, traceability, material test reports, marking, and certificates. | Documentation and inspection requirements should be included before the order is placed. | Material test report and heat traceability, if required by the purchase specification |