| 1 | General-purpose polyolefin profile | Black masterbatch for routine coloration and opacity | PE or PP; film, molded parts, and general extrusion | Carbon black content, shade consistency, pellet appearance, and dispersion | Carbon black content may be measured using ASTM D1603; dispersion in polyolefins may be evaluated using ISO 18553 where applicable. |
| 2 | Film-grade profile | Black concentrates designed for film processing | LDPE, LLDPE, or HDPE; blown and cast film | Dispersion, screen-pack performance, film appearance, and compatibility with the base resin | Microscopic dispersion assessment, melt-flow testing, and film trials under the intended processing conditions. |
| 3 | Pipe and pressure-pipe profile | Black compounds or concentrates for pipe applications | Typically PE pipe systems | Carbon black dispersion and content, batch consistency, and compliance with the applicable pipe-system specification | ISO 18553 addresses assessment of carbon black or pigment dispersion in polyolefin pipes, fittings, and compounds; applicable product standards should also be checked. |
| 4 | UV-resistant outdoor profile | Black formulations intended for exterior exposure | PE or PP; agricultural, construction, and outdoor products | Carbon black type and dispersion, formulation compatibility, and weathering performance of the finished article | Weathering exposure is assessed using a method selected for the end use; results depend on the resin, specimen, and exposure conditions. |
| 5 | Injection-molding profile | Black concentrates for molded components | PP, PE, and selected engineering polymers | Color uniformity, flow behavior, dispersion, surface finish, and mechanical-property retention | Melt mass-flow rate can be measured using ISO 1133; tensile properties may be evaluated using ISO 527 when relevant to the application. |
| 6 | Electrical-conductive profile | Conductive or antistatic black compounds and concentrates | Polyolefins and selected specialty polymers; conductive parts and packaging | Electrical resistivity, dispersion, loading, and sensitivity to processing and specimen preparation | Volume or surface resistivity should be measured using a method appropriate to the material and end-use specification; conductivity is formulation-dependent. |
| 7 | Cable and wire profile | Black color concentrates for cable compounds and sheathing | PE and other cable-grade polymers, as specified by the cable design | Dispersion, contamination control, processability, and compatibility with the insulation or sheath compound | Testing should follow the applicable cable-material specification; extrusion trials and visual inspection of the finished layer are commonly used. |
| 8 | Engineering-polymer profile | Black concentrates developed for higher-performance thermoplastics | Examples include ABS, polyamide, and polycarbonate, subject to grade compatibility | Thermal stability, polymer compatibility, dispersion, color, and effect on mechanical properties | Thermal and mechanical tests should be selected for the specific polymer and end use; processing trials help verify compatibility. |
| 9 | Recycled-polymer profile | Black concentrates formulated for use with recycled resin streams | Recycled PE or PP; applications depend on the feedstock and required properties | Compatibility with variable feedstock, odor or contamination risks, shade stability, and batch-to-batch processability | Incoming-material checks, melt-flow monitoring, visual inspection, and application-specific mechanical testing are useful controls. |
| 10 | Custom-compounding profile | Application-specific black masterbatch with tailored carrier and additives | Selected thermoplastics and processes, based on customer requirements | Formulation repeatability, traceability, agreed specification limits, and validation on customer equipment | A documented specification, representative production trial, certificate of analysis, and change-control process support qualification. |