| 1 | Resistance Range | Common series cover values from a few ohms to several megohms; the available range depends on the series and package. | Confirm standard values, custom-value availability, and resistance limits for the requested part number. |
| 2 | Resistance Tolerance | Common options include ±1% and ±5%; precision series may offer tighter tolerances such as ±0.1% or ±0.25%. | Check which tolerances are stocked and whether tighter options apply across the full resistance range. |
| 3 | Temperature Coefficient of Resistance (TCR) | Product options commonly span approximately ±5 to ±100 ppm/°C, depending on construction and series. | Review the specified TCR, measurement conditions, and resistance-value restrictions in the datasheet. |
| 4 | Rated Power | Axial metal film parts are available in multiple ratings, often from about 0.125 W to a few watts; rating depends on body size and ambient conditions. | Check the derating curve, mounting conditions, and maximum power at the intended ambient temperature. |
| 5 | Operating Temperature | Many general-purpose series specify ranges around −55°C to +155°C, but the limits are product-specific. | Confirm the operating range and any power derating or resistance-change limits over temperature. |
| 6 | Maximum Working Voltage | The limit is determined by the part’s datasheet and may be lower than the value calculated from rated power and resistance. | Check both the maximum working voltage and overload voltage; use the lower applicable design limit. |
| 7 | Stability and Reliability | Resistance drift is normally specified as a limit after defined endurance, humidity, or temperature tests; there is no single universal value. | Request the test conditions, allowable resistance change, and applicable qualification or inspection records. |
| 8 | Package and Construction | Metal film resistors are offered in forms such as axial leaded parts and surface-mount chip parts; dimensions vary by series. | Match package dimensions, termination style, mounting method, and the required PCB footprint. |
| 9 | Compliance Documentation | RoHS and REACH status is specific to the product and documentation revision. | Obtain current declarations and confirm they cover the exact part number and production location. |
| 10 | Automotive Qualification | AEC-Q200 qualification applies only to specifically qualified component series; it should not be assumed for all metal film resistors. | For automotive use, verify the exact series qualification, revision, and supporting reliability documentation. |