| 4x4 routing | A true 4-input, 4-output design that can route and switch sources independently for each output, if independent routing is required. | Request a routing diagram and test all 16 input-to-output combinations, including simultaneous different sources on different displays. |
| Video bandwidth and formats | Match the product’s stated HDMI version and bandwidth to the required resolution, refresh rate, chroma format, and bit depth. HDMI 2.0 specifies a maximum data rate of 18 Gbit/s; HDMI 2.1 supports data rates up to 48 Gbit/s, but actual device capabilities vary. | Ask for a per-port format table and test the intended source, matrix, cable, and display together. Do not rely on a resolution label alone. |
| HDCP compatibility | Clearly documented HDCP support for the required protected-content sources and displays. Compatibility depends on the versions supported by the complete signal chain. | Request written per-input and per-output compatibility details, then test with the actual protected-content equipment. |
| EDID management | Options for reading, copying, or selecting EDID settings to help sources negotiate a compatible video and audio format. | Ask for the available EDID modes and confirm behavior when displays with different capabilities are connected. |
| Control interfaces | The control methods needed for the installation, such as front-panel buttons, IR, RS-232, or Ethernet-based control. Network control and command sets are product-specific. | Request the command protocol, connection details, and a sample control test with the intended automation system. |
| Audio handling | Clear documentation of supported audio formats and any audio extraction, downmixing, or de-embedding functions. These features are not universal across matrix switchers. | Verify the exact audio output type and test the required formats with the target amplifier or audio system. |
| Signal integrity and cabling | Realistic cable-length guidance for the specified resolution and cable type. Maximum reliable distance depends on the source, cable, matrix, display, and signal format. | Ask for test conditions behind distance claims and validate the installation’s actual cable route before purchase. |
| Product and quality documentation | A current datasheet, user manual, port diagram, firmware information, and documented quality-control process for the quoted model. | Check that documents refer to the exact model and hardware revision being quoted; request sample test records where appropriate. |
| Compliance and safety | Applicable safety and electromagnetic-compatibility documentation for the destination market. Required approvals depend on the product and country. | Request relevant declarations and test reports, and confirm that the model number matches the product being supplied. |
| Customization and OEM support | If customization is needed, check supported changes such as enclosure, labeling, control behavior, or packaging, along with minimum order quantity and lead time. | Get the customization scope, sample approval process, production lead time, and costs in writing before placing an order. |
| Warranty and after-sales support | A written warranty period, fault-reporting process, repair or replacement terms, and availability of technical support and spare units. | Compare the written terms, response process, and support coverage for the destination country—not just verbal assurances. |
| Supplier fit | Choose based on demonstrated product fit, verified documentation, sample-test results, delivery capability, and support terms rather than an unverified “top supplier” ranking. | Use the same requirement sheet and acceptance tests for every shortlisted supplier to make the comparison fair and repeatable. |