| 1 | Electrical design and current-carrying performance | 15% | Confirm that conductor material, cross-section, joint design, and connection layout meet the battery system’s specified current and voltage requirements. | Approved drawings; resistance measurements using a documented method; current and temperature-rise test results under stated operating conditions. Do not compare temperature-rise figures without matching test conditions. |
| 2 | Thermal performance | 12% | Check temperature distribution at busbars, welds, terminals, and other electrical interfaces during representative operation. | Test report specifying current, ambient temperature, test duration, sensor locations, and acceptance limits; thermal imaging may support, but does not replace, defined measurements. |
| 3 | Mechanical and connection reliability | 10% | Assess resistance to vibration, shock, deformation, and connection loosening according to the battery application and customer requirements. | Application-specific vibration or mechanical test reports; weld or joint inspection records; dimensional inspection against controlled drawings. |
| 4 | Material selection and compliance | 10% | Verify conductor, insulation, carrier, and adhesive specifications, as applicable. Confirm that declarations match the exact materials and product configuration supplied. | Material certificates and traceable declarations for applicable requirements, such as RoHS Directive 2011/65/EU (as amended) and relevant REACH obligations. Compliance depends on the product and destination market. |
| 5 | Manufacturing process control | 10% | Review controls for cutting, forming, insulation application, welding or joining, assembly, and final inspection, as relevant to the design. | Process flow, control plan, inspection records, equipment-maintenance records, and documented procedures for handling nonconforming product. |
| 6 | Quality management system | 8% | Check whether the supplier’s quality system is appropriate to the intended market and is certified by an accredited certification body where certification is required. | Valid certificate scope and expiry date. ISO 9001 is a general quality-management standard; IATF 16949 is an automotive quality-management standard and is not a substitute for product-specific qualification. |
| 7 | Engineering and customization capability | 8% | Evaluate design-for-manufacturing support, tolerance review, material selection, and ability to work from customer drawings and interface requirements. | Design review records, revision-controlled drawings, tolerance analysis, sample evaluation plan, and documented change-control process. |
| 8 | Prototype and production readiness | 7% | Confirm that prototype approvals, production validation, capacity planning, and ramp-up controls align with the buyer’s launch schedule and demand forecast. | Sample and pilot-build records; stated capacity assumptions; production-readiness checklist; delivery performance measured over an agreed period. |
| 9 | Traceability and corrective action | 7% | Determine whether supplied parts can be linked to relevant material batches, production records, inspection results, and engineering revisions. | Example lot-traceability record; retention policy; documented complaint and corrective-action process, including root-cause analysis and effectiveness checks. |
| 10 | Commercial terms and customer support | 13% | Compare total landed cost, lead-time commitments, minimum order quantities, warranty terms, communication, and support for technical issues. | Comparable quotations based on the same specification and Incoterms; written lead-time and warranty terms; named escalation process and after-sales response commitments. |