Our company only collects the necessary data and respects your privacy, in accordance with the General Law for the Protection of Personal Data 13.709/2018. By continuing, you confirm that you have read and accepted the Privacy Notice. Privacy Policy.

Medal Group

China Top 10 Object Space Telecentric Lens Manufacturers?

China’s machine vision industry is expanding alongside factory automation, robotics, and precision inspection. The International Federation of Robotics reported 276,288 industrial robots installed in China during 2023. This represented more than half of global installations. Such density creates practical demand for accurate imaging optics, especially in electronics, batteries, automotive parts, and pharmaceutical packaging.

An object space telecentric len helps maintain nearly constant magnification across different object distances. This matters when a camera measures a connector pin, seal edge, or machined hole. Conventional lenses can make the same feature appear larger or smaller. Telecentric designs reduce that measurement error and support stable dimensional inspection. MarketsandMarkets’ Machine Vision Market report identifies inspection, robotics, and manufacturing automation as important growth areas. Its findings support the broader need for reliable optical components, although market estimates differ between research firms.

This article examines China’s top 10 object space telecentric len manufacturers. The selection considers working distance, magnification range, distortion, telecentricity error, image-circle coverage, coating quality, and delivery capability. It also reviews calibration support, testing procedures, customization, and application experience. Laboratory specifications are useful. Factory results matter more. A lens may show excellent resolution on paper but perform poorly under vibration, dust, or changing illumination. That is the uncomfortable part. Public company data is not always complete or comparable. Therefore, readers should verify current samples, MTF charts, inspection records, and warranty terms before purchasing. The technical discussion references the International Federation of Robotics’ World Robotics 2024 report and MarketsandMarkets’ Machine Vision Market research, while acknowledging that published figures may change.

Table of Contents [Hide]

1 Definition and Role of Object-Space Telecentric Lenses

2 Key Features Used to Evaluate Chinese Lens Manufacturers

3 Top 10 Chinese Object-Space Telecentric Lens Manufacturers

4 Manufacturing Capabilities and Industry Applications

5 How to Select the Right Telecentric Lens Supplier

Definition and Role of Object-Space Telecentric Lenses

Object-space telecentric lenses are optical systems designed to keep chief rays nearly parallel on the object side.

This structure reduces perspective distortion during image capture. An object can move slightly along the optical axis without showing a major size change.

The benefit is practical. A circular hole remains closer to its true shape, even when its depth varies.

This matters in dimensional inspection, robotics, electronics assembly, and precision manufacturing.

Engineers may use these lenses to measure edges, slots, pins, or molded parts with stable image scale.

In real inspection work, lens selection requires more than matching a camera mount.

The field of view, sensor size, pixel pitch, working distance, and object height must be checked together.

A telecentric lens may also need coaxial or diffuse lighting to prevent shiny edges from misleading the measurement.

Its limited depth of field can become troublesome with uneven parts.

No lens is perfectly telecentric across every wavelength and field point. That assumption deserves testing.

A useful evaluation places calibrated objects at several heights, then compares measured dimensions and edge contrast.

Larger optics, narrow viewing angles, and higher costs can also affect system design.

Engineers sometimes choose a conventional lens too quickly, then discover perspective error during final validation. Careful trials are less convenient, but they expose weaknesses before production equipment is fixed.

Key Features Used to Evaluate Chinese Lens Manufacturers

When comparing China’s object-space telecentric lens manufacturers, evaluation should begin with measurable optical performance, not catalog language. Ask for telecentricity data across the stated working distance, magnification, and sensor format. A reliable supplier can provide MTF curves, distortion results, chief-ray angle, and illumination uniformity under defined test conditions. Test conditions matter. Without them, two charts may look comparable but describe different realities.

Manufacturing control reveals more than a polished sample. Review centering tolerance, lens spacing, coating consistency, and alignment procedures. Request inspection records for each production batch, including interferometric or collimation checks where appropriate. Examine how the manufacturer manages custom mounts, threaded interfaces, and thermal expansion. A lens may meet optical specifications yet fail after installation because the housing shifts by a fraction of a millimeter. Practical experience suggests requesting pilot units before a larger order. Measure repeatability on your own camera, lighting system, and target. This step can expose weaknesses early.

Technical support and traceability deserve equal weight. Look for clear drawings, revision control, calibration methods, lead-time evidence, and a named engineering contact. Ask how defects are analyzed and corrected, not merely replaced. Compare packaging, cleanliness, and environmental testing for dust-sensitive inspection lines. No evaluation is perfect. Supplier websites may omit difficult results, while one test sample can create false confidence. A balanced review combines factory evidence, independent measurements, and transparent communication.

China Top 10 Object Space Telecentric Lens Manufacturers? - Key Features Used to Evaluate Chinese Lens Manufacturers

The following table presents ten measurable criteria commonly used to evaluate object-space telecentric lens manufacturers. The benchmark values are typical engineering requirements for industrial machine-vision applications and do not represent any specific company or brand.

Rank	Evaluation Dimension	Recommended Benchmark	Suggested Weight	How to Verify
1	Object-Side Telecentricity	Telecentricity error typically ≤ 0.1° for precision inspection	18%	Review the optical test report and measure image scale at different object distances.
2	Distortion Control	Typical distortion ≤ 0.1%; premium inspection models may reach ≤ 0.05%	15%	Use a calibrated dot grid or checkerboard to calculate maximum geometric deviation.
3	Resolution and MTF	Resolution matched to sensor pixel size; MTF commonly specified at 20–50 lp/mm	14%	Request MTF curves across the image field and compare them with the camera sensor requirement.
4	Magnification Range	Common industrial range: 0.05× to 1.0×; higher magnification available for specialized inspection	11%	Confirm nominal magnification, tolerance, and compatibility with the required field of view.
5	Sensor and Image-Circle Compatibility	Image circle commonly supports 1-inch, 1.1-inch, 4/3-inch, or larger sensors	10%	Match the specified image circle and flange distance with the selected camera and mount.
6	Working Distance	Typical working distances range from approximately 65 mm to 200 mm	8%	Check the working-distance tolerance, mechanical clearance, and lighting arrangement.
7	Depth of Field	Application-dependent; approximately 1–10 mm is common in many inspection configurations	7%	Verify depth of field at the intended aperture, magnification, wavelength, and acceptable blur level.
8	Aperture and Illumination Efficiency	Typical maximum aperture around f/4 to f/8, depending on magnification and optical design	6%	Test brightness uniformity, vignetting, and exposure stability at the intended operating aperture.
9	Coating and Spectral Performance	Visible-light designs commonly cover approximately 400–700 nm; broadband options may extend beyond this range	6%	Request transmission, reflection, and chromatic-aberration data for the actual lighting wavelength.
10	Manufacturing Consistency and Quality Control	Documented inspection for centration, back focal length, flange distance, distortion, and resolution	5%	Review sample inspection reports, calibration records, batch consistency, warranty terms, and traceability.
Total Evaluation Weight			100%	Use the weighted criteria together with application-specific testing.

Top 10 Chinese Object-Space Telecentric Lens Manufacturers

China’s object-space telecentric lens sector is gaining attention as machine vision expands in electronics, batteries, semiconductors, and precision inspection. MarketsandMarkets reported that the global machine vision market could grow from about USD 13.7 billion in 2023 to USD 20.7 billion by 2028. This demand supports a wider group of Chinese manufacturers, including optical designers, precision assemblers, and integrated vision suppliers.

A credible Top 10 Chinese Object-Space Telecentric Lens Manufacturers list should measure more than catalog size. Buyers should examine telecentricity error, distortion, working distance, sensor coverage, numerical aperture, and calibration records. In practical testing, a lens may show less than 0.1% distortion yet lose contrast near the image edge. That detail matters. ISO 10110 drawing practices and ISO 9283-style measurement discipline can improve technical consistency, although not every supplier publishes complete test conditions. This is a weakness worth questioning.

Tips: Request sample images using your own parts. Check illumination uniformity, mounting tolerance, and temperature stability. Ask for MTF curves at the actual wavelength and sensor size. Also confirm whether the stated magnification remains stable across the working distance. A low price can be attractive, but replacement alignment may cost more than expected.

China Top 10 Object-Space Telecentric Lens Manufacturers

Reference framework for evaluating Chinese object-space telecentric lens manufacturers

The chart presents a practical reference weighting for comparing object-space telecentric lens suppliers. Optical performance, including telecentricity and distortion control, is weighted most heavily because it directly affects measurement accuracy. Working distance, magnification range, illumination compatibility, mechanical integration, customization capability, and quality consistency are also important selection criteria. These are evaluation dimensions rather than company-specific rankings or brand data.

Manufacturing Capabilities and Industry Applications

China’s object-space telecentric lens manufacturers are expanding alongside precision machine vision. Grand View Research estimated the global machine vision market at USD 13.1 billion in 2023, with growth continuing through 2030. This demand rewards factories that can hold tight tolerances, not merely produce attractive specifications.

Manufacturing capability begins with stable optical alignment. Skilled teams control lens centering, glass spacing, distortion, and working distance during assembly. A good lens keeps object size nearly unchanged when parts move vertically. That matters when inspecting metal connectors, battery tabs, molded components, and printed circuit boards.

Typical production checks include calibrated targets, modulation transfer testing, and distortion mapping. The details matter.

Field experience also exposes weaknesses. A claimed micron accuracy may depend heavily on lighting, camera resolution, and calibration quality. No lens works perfectly in every setup. Manufacturers with CNC machining, environmental testing, custom coatings, and traceable inspection records can support demanding applications more reliably.

SEMI’s World Fab Forecast continues to track more than 1,400 semiconductor facilities and production lines worldwide, highlighting the need for repeatable optical inspection. Yet smaller factories sometimes lack complete testing documentation. Buyers should request measurement data, sample images, and tolerance reports before approval.

How to Select the Right Telecentric Lens Supplier

China’s object space telecentric lens market is expanding with industrial vision demand. MarketsandMarkets projects the machine vision market to reachUSD 25.7 billion by 2028. Its 2023 baseline was about USD 17.2 billion.

Supplier selection requires more than comparing catalog prices. Confirm working distance, magnification, sensor size, numerical aperture, distortion, and telecentricity error. Ask for measured data, not only design values. A reliable supplier should provide inspection reports, optical tolerances, coating details, and calibration procedures. Check whether the lens maintains stable edges when object height changes. This matters when inspecting machined parts, connectors, or transparent components.

Test samples under your real lighting and camera settings. Industrial experience shows that a lens can perform well in a laboratory and fail beside a vibrating production line. Request repeatability data, temperature information, and a clear replacement policy. ISO 10110-style optical drawings can improve communication between engineering teams. Confirm lead times and batch consistency in writing. Good suppliers explain limitations openly. That is a useful sign.

Do not rely on rankings alone. A 2024 report by Grand View Research identifies automation and quality inspection as major machine vision growth drivers, but reports cannot predict every factory condition. I would compare at least three suppliers, then repeat the test after several production cycles. One overlooked issue remains common: buyers often choose the smallest lens package, not the most stable optical system.

Choose a company Medal of
Group Medal