| Compact small-bar Swiss lathe | Approximately 3–12 mm (0.12–0.47 in), depending on configuration | A guide bushing supports the bar close to the cutting tool. The bar advances through the bushing as the machine performs programmed operations. | Turning, facing, drilling, threading, and light cross-working when equipped with suitable live tooling | Small pins, miniature shafts, electrical contacts, and precision fasteners | High-volume production of small-diameter parts where repeatability and reduced part deflection are important |
| General-purpose mid-size Swiss lathe | Approximately 12–25 mm (0.47–0.98 in) | One or more spindles rotate the workpiece while independently controlled tools machine its front and, where equipped, back end. | Turning, boring, drilling, threading, grooving, and milling with driven tools | Medical instrument components, connector bodies, small valve parts, and precision shafts | Mixed production runs requiring a balance of part capacity, machining flexibility, and cycle time |
| Large-bar Swiss lathe | Approximately 25–38 mm (0.98–1.50 in); larger capacities are available in some designs | The sliding headstock feeds bar stock through a guide bushing, supporting the work near the cutting zone during machining. | Heavy turning, deep drilling, threading, grooving, and cross-milling when fitted with appropriate tooling | Longer shafts, fluid-control components, automotive parts, and larger precision fittings | Parts that benefit from Swiss-style support but require more bar diameter or greater machining capacity |
| Twin-spindle, multi-tool Swiss lathe | Commonly available across small- and mid-size bar capacities | A main spindle machines the front of the part; a sub-spindle can pick it up and complete back-side features, often within the same cycle. | Front- and back-end turning, drilling, threading, milling, and part transfer between spindles | Finished pins, threaded fittings, stepped shafts, and components with features on both ends | Reducing secondary handling and combining multiple machining steps in one production cycle |
| High-axis Swiss lathe with extensive live tooling | Varies by machine size; commonly selected for small- to mid-diameter work | CNC-controlled axes coordinate the main and auxiliary tools. Driven tool stations rotate cutters to create features off the part’s centerline. | Turning, milling, cross-drilling, tapping, polygon machining, and multi-face work, depending on configuration | Complex connectors, surgical instrument components, sensor housings, and precision miniature parts | Reducing extra setups for parts with multiple turned and milled features |
| How a Swiss-type lathe produces a part | Selected to match the raw bar diameter and finished-part envelope | Bar stock is loaded through the spindle; the guide bushing supports it near the cutting zone. The CNC program coordinates bar feeding, spindle rotation, tool movement, and any sub-spindle transfer. | Material is removed in programmed stages. Parts may be cut off after machining or transferred to a sub-spindle for additional operations. | Turned and, when equipped, milled components made from bar stock | Long, slender, small-diameter, or intricate parts that benefit from close work support and repeatable production |
| Buying checks for 2026 | Confirm the required bar range, including feeder and collet compatibility | Evaluate the complete production cell, not just the lathe: machine, bar feeder, tooling, workholding, chip handling, and inspection requirements. | Review spindle configuration, guide-bushing setup, available axes, live-tool stations, programming support, and maintenance access. | Assess sample parts, required tolerances, material, surface finish, and expected production volume. | Compare quotes using the same options and verify that the proposed configuration can perform the required operations. |