| 1 | Raintight compression connector | Zinc alloy or steel body with compression ring and sealing components, depending on the model | Often 1/2–4 in; availability varies by product line | Secures EMT to an enclosure while forming a tight mechanical connection | Choose a model specifically listed or marked for raintight use; not automatically submersible | Outdoor conduit entries and exposed installations where the applicable code permits the fitting |
| 2 | Heavy-duty compression connector | Typically a robust metal body with a compression mechanism; material and finish vary | Commonly 1/2–4 in, depending on manufacturer and listing | Provides a firm EMT-to-box connection for demanding commercial or industrial installations | Use outdoors only when the exact model is identified for the required wet-location conditions | Installations needing added mechanical strength or a durable fitting body |
| 3 | Insulated-throat compression connector | Metal connector with a smooth insulating throat or insert | Often 1/2–4 in; check the product’s size range | Connects EMT to an enclosure and helps protect conductor insulation at the entry | The insulated throat alone does not make a connector raintight; verify the fitting’s location rating separately | Panel, cabinet, and box entries where conductor protection is desired |
| 4 | 90-degree compression connector | Angled metal body with a compression connection; some versions include an insulated throat | Commonly offered in smaller trade sizes; exact range is model-specific | Turns EMT into an enclosure where a straight entry is impractical | For wet locations, confirm the 90-degree model itself carries the required raintight marking or listing | Tight spaces, shallow enclosures, and conduit routes requiring a compact turn |
| 5 | Grounding or bonding compression connector | Compression-style EMT fitting with a grounding or bonding provision, depending on design | Size range varies; match the fitting to the EMT trade size and grounding method | Supports the required electrical bonding or grounding arrangement at a connection point | A grounding feature does not establish a wet-location rating; check both electrical and environmental markings | Systems where the design or applicable code requires a dedicated bonding or grounding connection |
| 6 | Gasketed raintight set-screw connector | Set-screw body with a gasket or other sealing feature in models intended for raintight service | Commonly available in standard EMT sizes; confirm the specific range | Attaches EMT to an enclosure using one or more set screws | Set-screw construction alone is not raintight; use only a model explicitly identified for the intended location | Projects seeking a set-screw connection while requiring a verified raintight fitting |
| 7 | Standard set-screw connector | Typically zinc alloy or steel body secured to EMT with set screws | Often 1/2–4 in, depending on the product | Provides a straightforward mechanical connection between EMT and an enclosure | Generally intended for dry-location use unless the specific product is marked otherwise | Indoor installations where a basic, economical EMT termination is suitable |
| 8 | Insulated-throat set-screw connector | Set-screw connector with an insulating throat or insert | Common sizes vary by product family | Secures EMT at an enclosure and helps reduce abrasion at the conductor entry | An insulating insert is not a moisture seal; confirm any separate raintight or wet-location qualification | Indoor distribution panels, junction boxes, and equipment cabinets |
| 9 | Expansion connector for EMT | Multi-part fitting designed to accommodate movement; construction and sealing details vary | Available sizes depend on the product and movement requirements | Allows controlled longitudinal movement in a conduit run where the fitting is designed for that purpose | Verify that the exact expansion fitting is approved for the location and installation; do not assume it is raintight | Long runs or building transitions where thermal or structural movement must be considered |
| 10 | Corrosion-resistant compression connector | Corrosion-resistant metal or protective finish, as specified for the product | Size availability is product-specific | Terminates EMT while offering a material or finish selected for a more corrosive environment | Corrosion resistance and raintight performance are separate properties; verify both for the intended exposure | Coastal, industrial, or other environments where the specified material and listing are appropriate |