| Hinged swing door | Swings outward or inward on hinges; suited to openings with enough clearance for the door arc. | A safety switch detects whether the door is closed. Guard locking can be added when access must remain restricted until hazards stop. | Machine enclosures, maintenance access points, and smaller production cells. | Check swing clearance, hinge alignment, and whether the door can be opened before hazardous motion has stopped. |
| Sliding door | Moves horizontally along a track, usually parallel to the machine enclosure. | An interlock monitors the closed position; a guard-locking device may hold the door shut during a hazardous cycle. | Automated cells and machine openings where a swinging door would obstruct walkways or work areas. | Keep tracks clear and prevent the panel from being lifted, bypassed, or moved out of alignment. |
| Vertical lift-up door | Moves upward, manually or with powered assistance, to expose the machine opening. | A position-sensing interlock detects closure. Where gravity or stored energy can move the guard, suitable mechanical support is also needed. | Presses, packaging equipment, and larger openings with limited floor-level clearance. | Account for the door’s weight, falling hazards, and safe support during inspection or maintenance. |
| Removable or hinged access panel | Is detached or opened to reach an area that does not need frequent operator access. | A coded or mechanically actuated interlock can monitor the panel. Fasteners may be appropriate when access is infrequent and tool use is acceptable. | Fixed machine covers, service panels, and access points used mainly for maintenance. | Prevent easy removal or defeat where opening the panel could expose a person to hazardous motion. |
| Perimeter access gate | Provides walk-through access to a fenced machine cell or restricted production area. | A gate interlock signals the safety control system when the gate opens; guard locking may be needed if the hazard takes time to stop. | Robotic cells, automated lines, and larger guarded work zones. | Position the gate to support safe entry and exit, and consider whether a person could be trapped inside the guarded area. |
| Interlocked guard with guard locking | May be hinged, sliding, or lift-up; the defining feature is that the closed guard is held locked when required. | The system monitors both guard position and the locked condition. Unlocking is permitted only when the applicable safety conditions are met. | Machines with a run-down time, hazardous tool motion, or processes that remain dangerous after a stop request. | Use when risk assessment shows that stopping time or residual hazards make immediate access unsafe; interlocking alone does not physically hold the door shut. |