| Duplex 2304 | S32304 | Lean duplex | About 23% chromium, 4% nickel; generally no intentional molybdenum addition | Duplex structure provides higher strength than common austenitic grades and useful resistance to stress-corrosion cracking in suitable environments. | Structural and process components, tanks, water-handling equipment, and general corrosive-service parts. | Often considered where a leaner duplex alloy may meet the corrosion requirements. Check the specific media and temperature; it is not a direct substitute for higher-alloy duplex grades in every chloride service. |
| Duplex 2205 | S31803 / S32205 | Standard duplex | About 22% chromium, 5% nickel, 3% molybdenum, with nitrogen | Combines relatively high strength with strong resistance to chloride stress-corrosion cracking, pitting, and crevice corrosion compared with many standard stainless steels. | Oil and gas equipment, chemical-process components, pressure-containing parts, marine systems, and pulp-and-paper equipment. | S32205 has tighter composition limits than the original S31803 designation. Confirm the specified UNS grade, product standard, heat treatment, and corrosion environment. |
| Super Duplex 2507 | S32750 | Super duplex | About 25% chromium, 7% nickel, 4% molybdenum, with nitrogen | Higher alloy content gives strong resistance to pitting and crevice corrosion in demanding chloride environments, along with high strength. | Seawater systems, offshore equipment, desalination components, heat exchangers, and aggressive chemical-process service. | Requires controlled fabrication and heat treatment. Assess the exact seawater or process conditions, including temperature, deposits, and crevice geometry. |
| 17-4 PH | S17400 | Precipitation-hardening martensitic stainless steel | About 15–17.5% chromium, 3–5% nickel, copper, and niobium | Can be strengthened by aging heat treatment; offers high strength and useful corrosion resistance in many moderate environments. | High-strength shafts, valve and pump components, mechanical parts, and aerospace or industrial hardware. | Properties depend strongly on the solution-treated and aging condition. It is generally less suitable than duplex grades for severe chloride pitting or stress-corrosion service. |
| 15-5 PH | S15500 | Precipitation-hardening martensitic stainless steel | About 14–15.5% chromium, 3.5–5.5% nickel, copper, and niobium | Provides age-hardenable strength and toughness; its composition is designed to support a more uniform structure in many product forms. | High-strength components, shafts, fittings, and precision-machined parts where strength and dimensional control are important. | Choose the required aging condition and verify the applicable product specification. Corrosion resistance depends on condition, finish, and exposure. |
| 13-8 Mo PH | S13800 | Precipitation-hardening martensitic stainless steel | About 12.25–13.25% chromium, 7.5–8.5% nickel, molybdenum, and aluminum | Offers high strength and toughness after aging, with good resistance to stress-corrosion cracking for a precipitation-hardening stainless steel. | Highly loaded aerospace, energy, and industrial components, including precision parts requiring strength and toughness. | Its performance depends on heat-treatment condition and section size. Confirm product-form availability and required mechanical properties with the applicable specification. |