| Inline ultrasonic (transit-time) | Uses the difference in travel time of ultrasonic signals moving with and against the water flow. | Full pipes in building services, commercial distribution, and process-water lines where low pressure loss is important. | No moving parts; generally causes little obstruction to flow; can support a wide operating range when correctly sized. | Requires a full pipe and correct installation. Air bubbles, suspended solids, pipe conditions, and poor sensor alignment can affect readings. | May provide flow rate, totalized volume, alarms, and data through pulse, wired, or digital communication outputs. |
| Clamp-on ultrasonic | External transducers send ultrasonic signals through the pipe wall and calculate flow without contacting the water. | Retrofits, temporary surveys, and systems where cutting or draining the pipe is difficult. | Installs without opening the pipe; no wetted components; useful for checking or comparing flows across existing lines. | Accuracy depends on pipe material, wall thickness, lining, sensor placement, and a suitable straight pipe section. The pipe must remain full for typical transit-time measurement. | Portable or fixed units can log readings and transmit data for remote monitoring, depending on the model. |
| Electromagnetic | Measures the voltage produced when electrically conductive water moves through a magnetic field. | Water distribution, wastewater, and process-water systems with conductive liquid and a continuously full pipe. | No moving parts; minimal obstruction; well suited to many larger pipes and water containing some suspended material. | Does not work with non-conductive liquids. Requires a full pipe and appropriate grounding; electrode condition and installation matter. | Common outputs include flow rate, total volume, configurable alarms, pulse signals, and digital communications. |
| Turbine | Water turns an internal rotor; rotor speed is related to flow rate. | Clean-water lines with relatively steady flow, including some building, irrigation, and process applications. | Compact design; can provide useful measurement over suitable flow ranges; often available with pulse or electronic readout. | Moving parts can wear or become affected by debris. A strainer may be needed, and low or highly variable flow can reduce measurement performance. | Pulse outputs can connect to a remote counter, data logger, or building monitoring system. |
| Positive displacement | Captures and counts repeated, known volumes of water passing through internal measuring chambers. | Small service lines, residential consumption measurement, and applications that need reliable measurement at relatively low flow. | Measures distinct volumes and can perform well at low flow when properly selected and maintained. | Internal moving parts create some pressure loss and may be affected by sediment or wear; check the meter’s flow range and maintenance needs. | Mechanical registers can be paired with pulse, radio, or other remote-reading modules for consumption tracking. |
| Multi-jet or single-jet velocity | Water drives an impeller or turbine, and the resulting rotation is converted into a flow or volume reading. | Small-diameter water services and submeters where a compact, established meter design is appropriate. | Widely used for water measurement; can be paired with remote-reading accessories; multi-jet designs distribute flow around the impeller. | Contains moving parts and may be sensitive to debris, wear, and installation conditions. Confirm minimum-flow performance and pressure-loss limits. | Register add-ons can provide pulse or radio readings for remote collection and usage alerts. |