| Required storage capacity | Daily demand, peak usage, refill rate, and the reserve needed during supply interruptions. | An undersized tank may not meet demand; an oversized tank can increase cost and may result in water remaining stored for longer. | Estimate demand over the intended reserve period, then account for usable volume, outlet level, and any required emergency reserve. |
| Water use and contact requirements | Whether the water is for drinking, general domestic use, irrigation, or an industrial process. | Tank materials, liners, fittings, and construction details must suit the water and its intended use. | For potable water, request documentation showing that the complete tank system is suitable for drinking-water contact under the rules applicable at the installation location. |
| Site and installation conditions | Available footprint, access for delivery, foundation design, drainage, and installation clearance. | Panel tanks can be assembled on site, which can help where access is restricted, but they still require a suitable, level support structure. | Confirm tank dimensions, assembly access, base requirements, and the full operating weight—including stored water—with a qualified designer. |
| Water pressure and tank configuration | Whether the tank is at ground level, elevated, or connected to a pump or pressurized system. | GRP tanks are commonly used as atmospheric storage tanks; they are not automatically suitable as pressure vessels. | Specify the intended operating arrangement and ensure that pumps, vents, overflows, and connections are designed for the tank’s rated service conditions. |
| Temperature and environment | Expected water temperature, outdoor exposure, sunlight, wind, and local weather conditions. | Temperature and environmental exposure can affect the tank, seals, fittings, and water quality over time. | Check the manufacturer’s stated operating limits and whether an approved cover, UV-resistant finish, insulation, or weather protection is needed. |
| Structural and site loads | Water weight, wind exposure, seismic conditions, roof or platform capacity, and support spacing. | Water weighs approximately 1,000 kg per cubic metre, so a full tank can impose a substantial load on its base or supporting structure. | Have the foundation and tank support system checked for the full design load and relevant local building and environmental requirements. |
| Water quality and hygiene | Protection from dust, insects, light, debris, and contamination during filling and storage. | A suitable tank alone cannot guarantee water quality; covers, vents, screens, pipework, and cleaning practices also matter. | Look for a secure cover, screened ventilation and overflow openings, accessible inspection points, and a practical cleaning plan. |
| Maintenance and inspection | Access to the interior, fittings, seals, supports, and external surfaces. | Routine inspection can help identify leaks, damage, sediment, or deterioration before they disrupt service. | Confirm safe access and follow the tank documentation and local guidance for inspection, cleaning, and repair intervals. |
| Service life and warranty | Specified design conditions, inspection requirements, repairability, and warranty exclusions. | Service life depends on design, installation, water conditions, exposure, and maintenance; it is not determined by material type alone. | Compare documented ratings and warranty terms, and verify that the proposed tank is designed for the actual site and water conditions. |
| Total installed cost | Tank, foundation, transport, assembly, connections, access equipment, and ongoing maintenance. | The purchase price may not include the supporting structure, site preparation, or installation work. | Compare quotations on a like-for-like basis, including capacity, accessories, installation scope, and any required compliance documentation. |