When a motor slows a load, its kinetic energy may return to the drive. A braking resistor converts that energy into heat. Selecting one starts with the load, not a catalog rating. Estimate the load’s inertia, operating speed, stopping time, and how often stops occur. A heavy flywheel stopping every few seconds creates a different duty from a lightly loaded fan stopping once per shift.
Check the drive’s permitted resistance range and peak braking current. The resistance must suit the braking circuit, while the resistor’s pulse-energy rating must handle each stop. Average power matters too, especially during repeated cycles. Heat matters. Consider ambient temperature, enclosure airflow, nearby cables, and the resistor’s mounting surface. A tightly enclosed cabinet can become much hotter than expected. Follow the drive and resistor manufacturers’ installation limits, including required clearances and thermal protection.
Real operating data is more useful than a guessed duty cycle. If measurements are unavailable, calculate conservatively, then review the assumptions after commissioning. They can be wrong. Confirm that the resistor can tolerate both the brief energy pulses and the average heat load; one rating alone does not tell the whole story. Leave room for changes in load or stopping frequency, but avoid choosing a larger unit without checking its electrical compatibility.